SDS+ shank drill bit fits in any SDS-Plus shank compatible hammer.
High Impact Grade Carbide Tip vacuum bonded with a custom formulated copper infused solder.
Made with the highest quality American chrome-molybdenum-nickel steel available.
After heat-treating, the drills are then shot-peened for an extra hardened solid steel body.
Sizes from 5/32" to 1-1/4"
and all other SDS+ chuck hammer drills.
QuanityDiscount
2 - 1010%
11+20%
SDS-Plus Bits - Metric SIzes
Metric sizes of our quality SDS-Plus drill bits
SDS-Plus Hollow Core Bits
1-piece unit for removing dust as you drill. Made by Dewalt.
German Made SDS-Plus Drill Bits
no image for class: sds-german
German made SDS-Plus drill bits
Sizes from 5/32" to 1-1/4"
Globally Sourced SDS-Plus Drill Bits
SDS+ shank drill bit fits in any SDS-Plus shank compatible hammer.
Globally Sourced. Sizes from 3/16" to 1"
SDS-Max
SDS-Max Drill Bits
SDS-Max shank fits in any standard SDS-Max shank hammer drill.
High Impact Grade Carbide Tip vacuum bonded with a custom formulated copper infused solder.
Made with the highest quality American chrome-molybdenum-nickel steel available.
The flutes on these bits ground in, not hobbed like many other brands!
This prevents undue stresses on the body of the drill during manufacturing before heat-treating.
After heat-treating, the drills are then shot-peened for an extra hardened solid steel body.
Quad-tipped Drill Bits offer greater resistance than single tip bits when encountering embedded rebar.
German Made SDS-Max Drill Bits
no image for class: sdsmax-german
German made SDS-Max drill bits
Sizes from 3/8" to 1-3/4"
DeWalt SDS-Max Shank Drill Bits
no image for class: dwmax
SDS-Max shank drills made by Dewalt in Germany
SDS-Max Hollow Core Bits
1-piece unit for removing dust as you drill. Made by Dewalt.
Spline
Spline Hammer Drill Bits
Spline shank fits in any standard Spline shank hammer drill.
High Impact Grade Carbide Tip vacuum bonded with a custom formulated copper infused solder.
Made with the highest quality American chrome-molybdenum-nickel steel available.
The flutes on these bits ground in, not hobbed like many other brands!
This prevents undue stresses on the body of the drill during manufacturing before heat-treating.
After heat-treating, the drills are then shot-peened for an extra hardened solid steel body.
Quad-Tip Carbide Hammer Drill Bits feature two extra carbide "teeth" to aid in rebar resistance.
DeWalt Spline Shank Drill Bits
no image for class: dwspl
Spline shank drills made by Dewalt in Germany
A-Taper
A -TAPER
A-Taper bits fit rotary hammers with a taper-shank chuck.
Tapered Drill Bits have more gripping power than standard round-shank drill bits.
Available in sizes 3/16" to 7/8"
A-Taper Shank Adapters
Adapters for using A-Taper shank drills in other hammers
B-Taper
B-Taper
B-Taper bits fit rotary hammers with a taper-shank chuck.
B-Taper Drill Bits larger diameter facilitates larger hole sizes.
Available in sizes 1/2" to 1-1/8"
B-Taper Shank Adapters
Adapters for using B-Taper shank drills in other hammers
Hex Shank Hammer Drills
Hex Shank Hammer Drills
Rotary Impact grade, carbide-tipped drills.
6 flats on the shank for use in 3-Jaw (Jacobs) Chucks
Shank size is the same as the diameter of the drill Sizes from 1/8" to 1-1/2"
Lengths from 3" to 36"
QuanityDiscount
1 - 4910%
50 - 9915%
100+20%
Bellhangers
Carbide Tipped Bellhangers
Carbide Tipped for Masonry. Holes on either end of shank allow you to pull wires through holes from either direction.
Sizes from 3/16" to 1"
Lengths from 18" to 36"
Carbide Tipped for Masonry Stone, Brick, and Concrete
Carbide Tip penetrates masonry, brick, and other stone.
Flexible shanks allows you to drill behind walls
Holes on either end of shank allow you to pull wires through holes from either direction.
Sizes from 1/4" to 3/4"
Lengths from 18" to 54"
Made in USAUse with our Flexibit Accesories
Other
Wide Flute Masonry Bits
Wide flute impact rated masonry drill bit with round shank.
Deep, wide flutes allow large chips and debris to exit the hole easily.
Fast Spiral Masonry Drills
Fast Spiral drills have a rapid twist flute to accelerate materials out of the drilling area.
Round shank
Granite Drill Bits
Diamond Ground Carbide Tipped Masonry Drill Bit.
Seriations on the tip make this bit more ideal for biting into harder stones like Granite, Tile, Brick Etc.
