Masonry Abrasive Wheels & Blades
Adapters for using A-Taper shank drills in other hammers
Adapters for using B-Taper shank drills in other hammers
Aircraft drills are extra long drills that are partially fluted to prevent damage to the upper parts of the hole.
Lengths 4" - 72" long
Diameters from 3/64" to 1/2"
shank size is the same as the diameter of the drill
Aircraft drills are extra long drills that are partially fluted to prevent damage to the upper parts of the hole.
call for additional sizes
shank size is the same as the diameter of the drill
Aircraft drills are extra long drills that are partially fluted to prevent damage to the upper parts of the hole.
Lengths 6" - 12" long
Diameters from #76 to #1
shank size is the same as the diameter of the drill
Core Drills for Metal; Made from M42 Cobalt steel. When a bi-metal holesaw won't do, these tools will drill through structural steel, aluminum, and other machinable metals. Use with an Annular Cutter chuck in a mill, or with a magnetic drilling rig. Requires reusable centering pin, sold seperately.
Chucks, adapters, and accessories for Annular Cutters
A-Taper bits fit rotary hammers with a taper-shank chuck.
Tapered Drill Bits have more gripping power than standard round-shank drill bits.
Available in sizes 3/16" to 7/8"
Holes on either end of shank allow you to pull wires through holes from either direction.
Carbide Tipped for Masonry. Holes on either end of shank allow you to pull wires through holes from either direction.
Sizes from 3/16" to 1"
Lengths from 18" to 36"
Carbide Tip penetrates masonry, brick, and other stone.
Flexible shanks allows you to drill behind walls
Holes on either end of shank allow you to pull wires through holes from either direction.
Sizes from 1/4" to 3/4"
Lengths from 18" to 54"
Made in USA
Extensions for Flexibits. Size indicates extension body size.
Made in USA
For metals. HHS construction, and a 118° split-point tip makes drilling though metal studs behind walls a breeze. Holes on either end of shank allow you to pull wires through holes from either direction.
Made in USA
Screw point bit digs into wood and pulls itself through. Holes on either end of shank allow you to pull wires through holes from either direction.
Made in USA
Holes on either end of shank allow you to pull wires through holes from either direction. Ship Auger flute design bites into wood.
Made in USA
Holes on either end of shank allow you to pull wires through holes from either direction. Threaded body digs into wood and pulls itself through.
Made in USA
Ideal for when you have a lot of holes to drill into a thin material, like sheet metal. Keep a spare drill in your chuck when you need it! These short drills are fluted from both ends, so you can flip the bit quickly when needed and get back to work
shank size is the same as the diameter of the drill
Available in sizes from 7/64" to 1/2"
B-Taper bits fit rotary hammers with a taper-shank chuck.
B-Taper Drill Bits larger diameter facilitates larger hole sizes.
Available in sizes 1/2" to 1-1/8"
14 Deg Included Angle Solid Carbide Burr.
Double Cut for heavy metal cutting.
60 Deg Included Angle Solid Carbide Burr.
Double Cut for heavy metal cutting.
Ball Head Cylindrical Solid Carbide Burr.
Double Cut for heavy metal cutting.
Ball Nose Cylindrical Solid Carbide Burr.
Double Cut for heavy metal cutting.
Carbide burrs are tools used for deburring, cutting, shaping, grinding, and chamfering hard materials.
Cone Shape Solid Carbide Burr.
Double Cut for heavy metal cutting.
Cylindrical Solid Carbide Burr.
Double Cut for heavy metal cutting.
Cylindrical with End-cut Solid Carbide Burr.
Double Cut for heavy metal cutting.
Flame Shape Solid Carbide Burr.
Double Cut for heavy metal cutting.
Inverted Cone Solid Carbide Burr.
Double Cut for heavy metal cutting.
Oval Shape Solid Carbide Burr.
Double Cut for heavy metal cutting.
Pointed Tree Solid Carbide Burr.
Double Cut for heavy metal cutting.
Round Tree Solid Carbide Burr.
Double Cut for heavy metal cutting.
Center drills provide a pilot hole for preparing to drill a larger diameter hole, or can be used as a combined drill and countersink.
Asphalt chisels have a sturdy wide blade with a sharpened point. Solid one-piece hardened-steel construction.
Square head with machined 1/4" tips. Solid one-piece hardened-steel construction.
Round head with 25 solid CARBIDE teeth. Hardened-steel body.
Clay spades feature a wide, sturdy scoop-shaped head for clay and soils. Solid one-piece hardened-steel construction.
For scaling, chipping, and chiseling. Great for cold weld spatter. Solid one-piece hardened-steel construction.
3-Part Floor Scraping Tool - Replicable Shank and Blade
Use your power tool to drive rods into the ground!
Forge-pointed tip. Solid one-piece hardened-steel construction.
Mortar style chisels feature a beveled tip for removing masonry mortar from joints. Solid one-piece hardened-steel construction.
A wide head and solid hardened-steel construction makes for fast removal of scale, rust, weld spatter and more
Slotting chisels are grooved to cut slots in grout and masonry surfaces. One-piece solid hardened-steel construction.
Hex Shank • Fluted body
Diamond core drills have diamond infused cutting teeth to provide a smooth cut and resist wear in the toughest materials.
Dry style diamond bits can be used without water cooling, however careful attention must be paid to not overspeed the drill
Diamond core drills have diamond infused cutting teeth to provide a smooth cut and resist wear in the toughest materials.
For use in water-cooled diamond drilling rigs
Shanks and accessories for Diamond Core Drills
Percussion Core Drills are a cost-effective core drill for a single size. Your chosen shank (sold separately) will become welded to the core drill during it's first use creating a solid bond.
Shanks and accessories for PC-Series Core Drills
Top Impact Grade Carbide Tips • Fluted Body • USA Made
Heavy duty "rope" threads solidly bond the core to the shank during use, and unscrew for use with other sizes
Use with a wide variety of power tools
Shanks, Starter Bits, and Extensions for PCN-Series Core Drills
Thin wall core drills cut a thinner path in your expensive masonry minimizing material loss.
Accessories for PCT-series thin wall percussion core drills
60° Point Angle
82° Point Angle
90° Point Angle
Carbide Tipped Die Drills have a sharpened carbide insert braised to the tip of the drill. Single flute design allows for a wide body cross-section for added strength. These are your best best when drilling hardened metals such as broken taps and other tools.
Carbide Tipped Jobbers feature a solid carbide tip braised to a durable High Speed Steel body, offering the tip hardness of a solid carbide drill, with the cost savings of a HSS drill.
Dies thread the outer diameter of a rod. Hex shaped dies can be driven by a large hand wrench or socket, or a hex die wrench.
Carbon steel dies are more cost effective than HSS dies for a small number of holes or in softer materials.
Pipe dies thread the outer diameter of pipe.
Dies thread the outer diameter of a rod. Round dies are driven by a round die wrench.
Carbon steel dies are more cost effective than HSS dies for a small number of holes or in softer materials.
Dies thread the outer diameter of a rod. Round dies are driven by a round die wrench.
Carbon steel dies are more cost effective than HSS dies for a small number of holes or in softer materials.
Dies thread the outer diameter of a rod. Round dies are driven by a round die wrench.
High Speed Steel dies are a more durable alternative to carbon steel dies for use in harder metals like iron and steel.
Wrenches for threading dies
Carbide Tipped Pilot Point Dirt Augers
Made In the U.S.A.
Displays, cabinets, and indexes for drill bits. No drill bits are included.
Adapt your way to 1/4"
Quit Dropping your tips!
Magnetic Bit Holders hold on to your 1/4" driver bits with the magical power of magnets!
Available in extended lengths
Drive your fasteners faster!
Magnetic nut setters hold fasteners in place with an embedded magnet
Also known as cross-head
Flat-head, Standard, Slotted. Straight and flat.
Square shaped bits for square shaped holes! Also known as Robertson, or Scrulox head bits
Also known as 6 lobe, or Star drive
SDS-Max shank drills made by Dewalt in Germany
Spline shank drills made by Dewalt in Germany
Fast Spiral drills have a rapid twist flute to accelerate materials out of the drilling area.
Round shank
Turn that hole into chips!
Unlike traditional holesaws, Forstner self-feed bits are not limited in the depth they can drill.
Sizes from 1" to 2-1/8"
Glass & Tile Drills excel in hard brittle materials like tile enamels, hard stone, and glass
Glass & Tile bit sets and accessories
Glass & Tile Drills excel in hard brittle materials. Diamond Glass Drills or "Glass Hole Saws" are coated in an industrial diamond abrasive, and cut the circumference of the hole.
Glass & Tile Drills excel in hard brittle materials. Quad-Tip glass bits have two additional carbide cutting edges providing extra stability when drilling larger holes in glass and tile.
Diamond Ground Carbide Tipped Masonry Drill Bit.
Seriations on the tip make this bit more ideal for biting into harder stones like Granite, Tile, Brick Etc.
Rotary Impact grade, carbide-tipped drills.
6 flats on the shank for use in 3-Jaw (Jacobs) Chucks
Shank size is the same as the diameter of the drill
Sizes from 1/8" to 1-1/2"
Lengths from 3" to 36"
Bi-Metal Hole Saws cut only the circumference of the material. Ideal for wood, plastics, and other soft materials. Screws on to a mandrel, sold separately or as part of a kit.
Mandrels, Extensions, Adapter plates, and other accessories for our holesaws
Jobber Length Drill Bit Sets
Jobbers with a body diameter greater than 1/4" have a shank machined down to 1/4" to fit in your standard home-handyman drill chuck.
Jobbers with a body diameter greater than 3/8" have a shank machined down to 3/8" to fit in your standard home-handyman drill chuck.
Black & Gold finish Heavy Duty Jobbers feature a premium grade steel, and coated flutes for improved lubrication and chip removal, and a 135° split-point.
Sizes larger than 3/16" have 3-flats on the shank
shank size is the same as the diameter of the drill
Cobalt Jobbers contain a percentage of Cobalt in their steel, greatly increasing their wear resistance.
shank size is the same as the diameter of the drill
Solid Carbide Jobbers are ground from a single piece of carbide billet. These are the hardest jobber style bits available.
TiN coated have a layer of Titanium Nitride electroplated to the cutting surface to improve edge hardness, and coolant flow
shank size is the same as the diameter of the drill
Jobber Length Drill Bits
shank size is the same as the diameter of the drill
Diameters from 33/64" to 11/16"
shank size is the same as the diameter of the drill
Jobber Length Drill Bits with a Brite finish
shank size is the same as the diameter of the drill
Heavy Duty Jobber Length Drill Bits
Heavy Duty drills feature a 135° split-point tip.
shank size is the same as the diameter of the drill
Left-handed drills are meant to spin counter-clockwise. Very useful for broken screw and bolt extraction.
12" - 18" long and full of flute! Longboys will give you the reach you need!
Diameters from 7/64" to 1-3/8"
shank size is the same as the diameter of the drill
12" - 18" long and full of flute! Longboys will give you the reach you need! 1/2" shank with 3-flats for strong grip on your chuck Diameters from 1/2" to 1-1/4"
1-piece unit for removing dust as you drill. Made by Dewalt.
Multi-cut Step Drills provide a huge convenience when you little space in your tool box, or need to cut a variety of holes with a single tool.
Masonry bits for P736 Shank Hammer Drills
Quit Touching Your Pole Holes!
Hollow Pole Drills are fluted just enough to pierce one wall of fiber glass poles at a time, preventing you from
damaging your entry hole while drilling your exit hole
90° Carbide Point drill through fiberglass rapidly and effortlessly
90° Carbide Point drill through fiberglass, Wood poles, Rubber and Wood rail ties rapidly and effortlessly
Drill Heads for the Tru-Cut screw-together PRAXIS Drilling system
Shanks and Extensions for the Tru-Cut PRAXIS screw-together drilling system
Jobber length HSS drills with a 1/4" Quick-change Hex Shank
1/4" Quick-Change Masonry Drills
Shanks and accessories for rebar and plate cutters
Plate cutters cut though steel plate embedded in concrete
Rebar cutters cut though rebar embedded in concrete
Reamers enlarge and smooth existing holes.
Spiral Flute - Morris taper Shank
Reamers enlarge and smooth existing holes.
Straight Flute - Morris taper Shank
60° Point Angle
Center reamers provide pilot holes for milling. The can also be used as heavy-duty countersinks.
82° Point Angle
Center reamers provide pilot holes for milling. The can also be used as heavy-duty countersinks.
90° Point Angle
Center reamers provide pilot holes for milling. The can also be used as heavy-duty countersinks.
Available in both Straight and Spiral flute
Construction Reamers larger than 1/2" have a 1/2" round shank that will fit into most drill-press and mill chucks
Hex Nut Reamers have a large hex head that can be driven by socket or wrench
Rock Hammer Bits are HEAVY DUTY stone breaking tools often used with large pneumatic and hydraulic powered hammers.
Power Tool Shanks for Rock Bits
7/8" HEX shanks available in lengths from 12" - 96"
These tungsten carbide bits have a uniquely designed tip which uses a negative rake angle and a shortened chisel edge to increase effectiveness and reduce tip breakage
Screw Extractor Bits grip the remainder of the bolt or screw after it's been drilled out
SDS+ shank drill bit fits in any SDS-Plus shank compatible hammer.
High Impact Grade Carbide Tip vacuum bonded with a custom formulated copper infused solder.
Made with the highest quality American chrome-molybdenum-nickel steel available.
After heat-treating, the drills are then shot-peened for an extra hardened solid steel body.
Sizes from 5/32" to 1-1/4"
1-piece unit for removing dust as you drill. Made by Dewalt.
SDS+ shank drill bit fits in any SDS-Plus shank compatible hammer. Globally Sourced. Sizes from 3/16" to 1"
German made SDS-Plus drill bits
Sizes from 5/32" to 1-1/4"
Metric sizes of our quality SDS-Plus drill bits
SDS-Max shank fits in any standard SDS-Max shank hammer drill.
High Impact Grade Carbide Tip vacuum bonded with a custom formulated copper infused solder.
Made with the highest quality American chrome-molybdenum-nickel steel available.
The flutes on these bits ground in, not hobbed like many other brands!
This prevents undue stresses on the body of the drill during manufacturing before heat-treating.
After heat-treating, the drills are then shot-peened for an extra hardened solid steel body.
German made SDS-Max drill bits
Sizes from 3/8" to 1-3/4"
Quad-tipped Drill Bits offer greater resistance than single tip bits when encountering embedded rebar.
Self Feed Bits have a replaceable screw point that draws the bit into wood. Drills well in overlapping holes.
Solid metal spurs and a chiseled body rip through large holes fast
5/8" shank with 3 Flats
Replacement screw tips, and extensions for Self Feed Bits
1/2" Shank Drill, sometimes referred to as Silver & Deming Drills
Diameters from 1/2" to 1-3/4"
Black & Gold finish Heavy Duty Jobbers feature a premium grade steel, and coated flutes for improved lubrication and chip removal, and a 135° split-point.
Cobalt drills contain a percentage of Cobalt in their steel, greatly increasing their wear resistance.
Diameters from 33/64" to 1-1/2"
Screw Machine Length Drill Bits are approx. 40% shorter than their jobber counterparts. Useful in tight spaces, as well as mini lathes and mills where there's not much room for tooling
shank size is the same as the diameter of the drill
Screw Machine Length Drill Bits are approx. 40% shorter than their jobber counterparts. Useful in tight spaces, as well as mini lathes and mills where there's not much room for tooling
Cobalt Jobbers contain a percentage of Cobalt in their steel, greatly increasing their wear resistance.
shank size is the same as the diameter of the drill
Screw Machine Length Drill Bits are approx. 40% shorter than their jobber counterparts. Useful in tight spaces, as well as mini lathes and mills where there's not much room for tooling
shank size is the same as the diameter of the drill
Left-handed drills are meant to spin counter-clockwise. These are typically used for broken screw and bolt extraction.
Spline shank fits in any standard Spline shank hammer drill.
High Impact Grade Carbide Tip vacuum bonded with a custom formulated copper infused solder.
Made with the highest quality American chrome-molybdenum-nickel steel available.
The flutes on these bits ground in, not hobbed like many other brands!
This prevents undue stresses on the body of the drill during manufacturing before heat-treating.
After heat-treating, the drills are then shot-peened for an extra hardened solid steel body.
Quad-Tip Carbide Hammer Drill Bits feature two extra carbide "teeth" to aid in rebar resistance.
Bottoming taps are used where you need to thread as much of a blind hole as possible. They are often difficult to get started and thus are typically used with milling machines, or after starting the hole with a taper tap.
Carbon steel taps are more cost effective than HSS taps for a small number of holes or in softer materials.
Pipe taps thread the inner diameter of tubing.
Made with Carbon Steel.
Plug Taps have more of a taper than Bottoming taps, thus are easier to start. They have less taper and are thus able to get more thread closer to the bottom of the hole than a Taper tap. Ideal for through-holes, or holes where you have extra room at the bottom of the hole
Carbon steel taps are more cost effective than HSS taps for a small number of holes or in softer materials.
Contains one each of Taper, Plug, and Bottoming Taps
Carbon steel taps are more cost effective than HSS taps for a small number of holes or in softer materials.
Ideal for hand-tapping; Taper Taps have a long taper into cutting the threads making it much easier to get started. However due to long taper, they're primarily useful for tapping through-holes, or starting threads to continue with a plug or bottoming tap.
Carbon steel taps are more cost effective than HSS taps for a small number of holes or in softer materials.
Combo Taps drill and thread in one tool, preventing tool changes from interrupting your workflow
TAP AND DIE SETS
Bottoming taps are used where you need to thread as much of a blind hole as possible. They are often difficult to get started and thus are typically used with milling machines, or after starting the hole with a taper tap.
High Speed Steel taps are a more durable alternative to carbon steel taps for use in harder metals like iron and steel.
Spiral Point Taps sometimes referred to as Gun Taps, have the cutting face of the first few threads cut at a predetermined angle to force removal of chips ahead of the cutting action. This gives the spiral point tap more cross-sectional area giving the tap greater strength, which allows for higher tapping speeds. Ideal for PRODUCTION and CNC use.
Pipe taps thread the inner diameter of tubing.
High Speed Steel taps are a more durable alternative to carbon steel taps for use in harder metals like iron and steel.
Plug Taps have more of a taper than Bottoming taps, thus are easier to start. They have less taper and are thus able to get more thread closer to the bottom of the hole than a Taper tap. Ideal for through-holes, or holes where you have extra room at the bottom of the hole
High Speed Steel taps are a more durable alternative to carbon steel taps for use in harder metals like iron and steel.
Pulley Taps have an extra long body to thread into deep holes. Made from High Speed Steel. Tapered starting threads
Contains one each of Taper, Plug, and Bottoming Taps
High Speed Steel taps are a more durable alternative to carbon steel taps for use in harder metals like iron and steel.
Ideal for hand-tapping; Taper Taps have a long taper into cutting the threads making it much easier to get started. However due to long taper, they're primarily useful for tapping through-holes, or starting threads to continue with a plug or bottoming tap.
High Speed Steel taps are a more durable alternative to carbon steel taps for use in harder metals like iron and steel.
Tap Wrenches ensure a firm grip and proper leverage for tapping by hand.
Drills with a single flat on their shank, compatible with the Tapcon system
Drills that work with the Morris Taper system
Carbide Tipped Cutters Drill faster and longer.
Spring Loaded Pilot for easy removal of center cuttings.
Hole Saws cut only the circumference of the material.
Drill bits for Wacker Shank Drills
Wide flute impact rated masonry drill bit with round shank.
Deep, wide flutes allow large chips and debris to exit the hole easily.
Get longer reach for your woodbits
Extensions for 1/4", 5/16", and 7/16" shanks
Sharp and durable brad on the tip self-centers for easy and fast pilot holes
Sizes from 1/8" to 3/4"
Electrician's bits rip though framing wood blazingly fast with their screw-point tip, and wide flutes for fast chip evacuation.
Features like these allow you to run conduit and wiring in less time
Sizes from 5/8" to 1-1/4"
Length: 8.5"
Sets, Kits, & Accessories for Woodbits
Ship Augers have a high durability against nails in wood.
7/16" Hex Shank, Screw Point tip
Sizes from 3/8" to 2"
Spur Augers have a spur on the tip of the drill that scores the exit hole before cutting it, allowing for cleaner exit holes.
7/16" Hex Shank, Screw Point tip
Sizes from 1/4" to 2"
Lengths from 8" to 24"
Spade Bits are durable, cost-effective bits for wood.
'wings' on blades score hole exit for cleaner holes
1/4" Quick-change hex shank • Self-centering brad-point tip
Only 4-13/16" long!
Will fit between 16" wall studs when chucked in most power drills
7/16" Hex Shank, Screw Point tip
Sizes from 1/2" to 1"
3-Flute Screw-Tipped Auger
6" overall length - 4" flute length - 1/4" Quick-change Shank